|
Owner of data set Vexve Denmark | Frese A/S |
Technical purpose Product description:
Frese sanitary valves and fittings form a range of articles for domestic and commercial installations, designed for distribution of potable water and for heating and cooling systems in buildings. The product group covers frost taps for exterior walls, stop and drain valves, radiator connections and drain valves, pipe joiners and couplings, and universal necks and shower pipes.
Together, these products make it possible to connect, shut off, drain and tap water safely from the main water supply inlet to the final outlet.
The components are mainly metallic with sealing elements in polymer and elastomer materials and are available with threaded, compression, PEX and AluPEX connections to interface with common pipe systems.
Frost taps ensure outdoor tapping with internal frost-free closure and integrated check valve, while stop and drain valves provide local isolation and controlled emptying of sections of the system.
Radiator connections and drain valves support filling, venting and maintenance of heating circuits and domestic water systems.
Pipe joiners and couplings allow repair and adaptation of steel, copper, PEX and AluPEX pipework without extensive rebuilding, and universal necks and shower pipes complete the installation at the point of use.
All products are intended for long service life under typical operating pressures and temperatures for sanitary and HVAC applications and are designed to be easy to install, use and service.
In this EPD, the sanitary valves and fittings are treated as one product group with variations in size, connection type and configuration, representing the average material composition and function of the range.
Product application:
Find the “Application Guide on the frontpage on our website: www.frese.eu.
Technical Characteristics:
Dimension: DN15-DN50
Pressure class: PN10 or PN16 (doesn’t apply for all for Universal Spout)
Max. temperature range: 65°C to 120°C
Product standards:
Find “Certificates and Declarations of Conformity on our website, under “Technical info @ www.frese.eu.
Physical properties of the product:
Materials: The valves in this group are primarily made of brass, accounting for more than 80% of their total weight, except for 29-2014 frost-proof tap, which contains 45% brass and 40% copper. Other materials include stainless steel, rubber (such as EPDM), and plastics (such as ABS, PA6, PA66, and POM).
Surface: Some products are surface treated with trivalent chromium. |
