|
Owner of data set Georg Fischer Fittings GmbH |
Technical purpose Malleable cast iron fittings are made for conveying liquids and gases up to the pressure and temperature limits specified in standard ISO 49 and EN 10242.
The portfolio in this study consists of 758 items. all are with non-coated surface (cast iron).
Fittings and union pieces parts are tested individually for leak tightness.
Main applications are pipe installations for cold tap water, fuels, fire sprinklers, oils and pressurized air.
The test pressures are above the values stipulated in the standard. Unless otherwise specified, the following working pressures and temperatures apply for the parts in the GF range of malleable cast iron fittings and unions:
Between -20°C up to 120°C up to max. 25bar, depending on the application and the related national and international regulations / standards.
Georg Fischer Fittings GmbH malleable cast iron fittings are exclusively manufactured from decarburised annealed (white) malleable cast iron type EN-GJMW-400-5 and with Rp and R jointing threads, from ¼ to 4 inch, whereas the size is designated based on the thread sizes defined in EN 10226-1 and ISO 7-1.
Further information can be found at: www.gfps.com and at www.fittings.at
The Georg Fischer Fittings GmbH site in Austria is certified according to EN ISO 9001, EN ISO 14001 and ISO 45001. |
